MiniStar Nano (Limited Edition)

MiniStar Nano (Limited Edition) Features:

• 1 MiniStar Nano board (module)
• 2 Connector Headers Through Hole

Tang Nano 4K + OV2640 Camera

Tang Nano 4K + OV2640 Camera Features:

• OV2640 camera
• 2x 22-pin headers with GPIOs

Gowin MiniStar Experiment Kit

Gowin MiniStar Experiment Kit Features:

• 2 boards set; Carry board: 70X57mm, Ministar board 20x57mm
• Embedded ARM Cortex-M3 hardcore processor
• Jtag Configuration Mode
• 27MHz clock crystal
• 2 key switches
• 1 power LED (green)
• 2 user lights (green)
• 256Kbit flash
• 2 sets of FPC extended IO ports
• Power supply w/ voltage reverse protection

A low cost, minimalistic Arduino-like breakout board with Lattice Ultraplus FPGA.

Gnarly Grey UPDuino Board Features

• Lattice UltraPlus FPGA
• 5.3K LUTs, 1Mb SPRAM, 120Kb DPRAM, 8 Multipliers
• Stacks onto Arduino Nano and Arduino Pro Mini Boards (same header spacing)
• 34 GPIO on 0.1” headers
• SPI Flash, RGB LED, 3.3V and 1.2V Regulators
• Open source schematic and layout using free Eagle PCB design tools

View Github

A low cost, minimalistic Arduino-like breakout board with Lattice Ultraplus FPGA and a USB programming device

Gnarly Grey UPDuino v2.0 Board Features:

• Lattice UltraPlus FPGA
• 5.3K LUTs, 1Mb SPRAM, 120Kb DPRAM, 8 Multipliers
• FTDI FT232H USB to SPI Device for FPGA programming
• 12Mhz Crystal Oscillator Clock Source
• 34 GPIO on 0.1” headers
• SPI Flash, RGB LED, 3.3V and 1.2V Regulators
• Open source PCB design in Eagle and Programming Instructions

View Github

Connects the Omnivision OV7670 camera module to the UPDuino FPGA boards. A camera IF to SPI slave with image frame buffer design is provided as well as image extraction instructions for UPDuino v2.0

UPDuino OV7670 Camera Adapter Board Features

• Easily connects the OV7670 camera module to UPDuino v1.0 or v2.0
• Provides crystal oscillator footprint for additional low power clock source

View Github

Connects the LG LH154 240x240 1.5" LCD display used on the iPod Nano to UPDuino boards.

UPDuino LH154Q01 Display Adapter Board Features:

• Connect the LH154Q01 iPod Nano 6th gen display to UPDuino
• On-board 50Mhz mems oscillator
• GPU Example design using Adafruit GFX library

View Github

Connects 8GB of HyperRAM Memory to UPDuino v2.0 and v1.0 over 11 GPIO pins.

UPDuino HyperRAM Adapter Features:

• Connects 8GB of RAM to UPDuino v2.0
• On-board S27KL0641DABHV020 HyperRAM Part
• Additional footprints for HyperFLASH and Crystal Oscillator

View Github

Accessory board for UPDuino v2.0, allowing for various peripheal connections

FPGA101 Workshop Board Features:

• LQ035NC111 Display connector
• PMOD Connector
• Push Buttons
• Battery Switch
• Demos, Tutorials and Examples
• (***Display and UPDuino v2.0 Sold Separately***)
• (***US Shipping Only for this Board; Contact for International Inquiries***)

View Github